Skip to main content

A-114 Dual Ringmodulator

  • Model :
  • Size :
    4 HP
  • Price :
    85 €
  • Technical details :

    Power consumption: 40mA at +12V and 30mA at -12V

    Depth: 40mm

A-114 Dual Ringmodulator

Module A-114 contains two separate ring modulators.


  • A ring modulator outputs the product (Multiplication X • Y) of the signals at inputs X and Y. It's similar to a VCA, but whereas a VCA only responds to positive voltages at the inputs (2-quadrant multiplication), the ring modulator responds to both positive and negative voltages (4-quadrant multiplication). The ring modulator thus provides a refinement of amplitude modulation (AM). Ordinary amplitude modulation will output the original carrier frequency fC as well as the two side bands (fC - fM, fC + fM) for each of the spectral components of the carrier and modulation signals - but ring modulation cancels out the carrier frequencies, and just lets the side-bands pass to the output.

    A ring modulator is used for the production of bell-like sounds, alien voices, or just to produce new timbres.

  • Technical notes:

    In case that a re-adjustment is required this is the adjustment procedure (German and English): A114_adjustment.pdf

    The module is suitable only for audio input levels (X In / Y In) up to 10Vpp. For higher levels clipping occurs. To avoid this attenuators may be used (e.g. A-183-1). Another possibility is to reduce the sensitivity of the inputs. For this the values of two resistors for each sub-unit have to be changed: R2/R2' (100k) has to be reduced (e.g 82k or 75k), R3/R3' (100k) has to be increased (e.g 120k or 150k). The positions can be found in the document  A114_adjustment.pdf.

    The inputs and outputs of the module are AC coupled. Consequently the module is suitable only for the processing of audio signals. A comparable module that is suitable also for slowly changing signals is A-133 Voltage Controlled Polarizer.

    A module that contains only one ring modulator and instead of the second ring modulator a S&H/T&H/Slew Limiter is A-184-1.

User Manuals


Where to buy