In the following table you find the jack sockets available with Moog Prodigy and our recommendation how to connect them to the CV and Gate outputs of our devices (e.g. MCV4, MAQ16/3, Dark Time, Dark Link) :
Progigy
MCV4/MAQ/Dark Time
Remark
S-Trig In/Out
Gate
S-Trig cable has to be used in combination with MAQ16/3 or Dark Time, the MCV4 or Dark Link has to be jumpered to S-Trig
KYB In/Out
no connection
Osc In
CV1
connected to the pitch CV output of the unit in question (e.g. CV1 of MCV4)
VCF In
CVx
connected to another CV output of the unit in question depending upon the type of VCF control (e.g. for MCV4 CV2: via velocity, CV3: via after touch, CV4: via MIDI controller
Sync In
no connection
As the MCV4 uses 2 stereo jack sockets for CV1...CV4 a special cable has to used for the connection between MCV4 and Moog Prodigy (1/4" stereo plug -> 2 x 1/4" mono plug). If the trigger is reverse (i.e. sound when key release and no sound when key pressed) the trigger polarity of the MCV4 has to be changed. For details please look at the user manual of the unit in question.